The UAS series is compatible with 2S - 8S LiPo (8.4V to 33.6V) power systems - allowing for the next level of performance and efficiency for your sUAS and multirotor applications
The series is tuned and optimized for the KDE Direct XF multirotor Brushless Motor Series for simple plug-and-play operation. No additional throttle calibration is required for most applications and settings are factory programmed
This KDE Direct XF UAS multirotor Electronic Speed Controller (ESC) is optimized for multirotor applications and utilizes a proprietary algorithm for up to 600Hz refresh rate control and high speed response to the flight system commands. Dynamic PWM and Motor Advance Timing algorithms are used for optimal flight performance
The series is specifically designed and optimized for the KDE Direct XF multirotor Brushless Motor Series. For maximum stability and performance of the flight controller, the system is tuned to react almost instantaneously to the flight commands and XF Brushless Motor response capability
Included:
- Two (2) KDE Direct XF 3.5mm 24K Bullet Connectors (Pair, Male/Female)
- Two (2) KDE Direct XF 4.0mm 24K Bullet Connectors (Pair, Male/Female)
Specifications:
Refresh Rate | 600 Hz (50 - 600Hz Adaptive) |
Maximum Current | 95 A (5s Burst) |
Maximum Power | 2,810 W (5s Burst) |
Continuous Current | 55+ A |
Continuous Power | 1,630+ W |
Maximum Efficiency | > 98% |
Voltage Range | 8.4 V (2S) - 33.6 V (8S) |
Internal BEC | None (Opto-Isolation) |
Maximum RPM | 240,000 rpm (2-Pole) |
PWM Rate | 16 kHz Dynamic Algorithm |
Advance Timing | 22° - 30° Dynamic Algorithm |
PCB Size | 25 mm (W) x 52 mm (L) |
ESC Weight | 32 g (54 g with Wires/Bullets) |
Power Leads | 13 AWG, 200°C |
Motor Leads | 15 AWG, 200°C |
ESC Lead | 22 AWG, 3-Wire JR |
Power Connects | 3.5 / 4.0mm Matched Pair |
Motor Connects | 3.5mm Female |
